Warm water with a mild household detergent should be sufficient to clean PC sheets.Wipe off any remained dirt with a soft cloth and wash again.Must remember never use a solvent based cleaner (ammonia, etc.). And avoiding using sponges or brushes that can scratch the sheets' surface.
timeFri, 11 Aug 2017 13:39:36 GMT
Polycarbonate sheets should be stored in a protected, shaded, ventilated site, with no direct exposure to sunlight and winds. In outdoor temporary storage cover with opaque protective film, and avoid heat-absorbing materials.Note: Surface protective films that cover sheets are highly sensitive to heat and direct sunlight. Excessive heat and direct sunlight before taking off the film can cause glui...
timeFri, 11 Aug 2017 11:06:00 GMT
Polycarbonate Multi-wall panels may be cut with a circular saw (using a very fine-toothed blade for plastic panels, veneer, or plywood). For best results, it is often better to cut a few corrugated panels at a time to reduce vibration; clamping the panels also helps. Also, if using a standard circular saw blade, better results may be seen by running the blade backwards (turn it over to reverse dir...
timeWed, 19 Jul 2017 14:36:58 GMT
网络文化经营许可证:浙网文[2013]0268-027号|增值电信业务经营许可证:浙B2-20080224-1 2007-2024 Tradevv.com. All rights reserved.