How to properly cut the polycarbonate hollow sheet
time2018/06/21
How to properly cut the polycarbonate hollow sheet
In daily life, we often see the sun board, but the sun board manufacturer believes that some customers do not know the correct cutting method of the sun board. Sometimes the production of the board is small, and the customer needs it urgently.
Discuss with customers whether to cut the original heart plate, Xiao Bian learned that many customers will agree to do so.
But how to cut will not waste the plate will not lead to damage to the plate? Next sun board manufacturers take everyone to find out.
Under normal circumstances, the size of the sun board produced is 2.1*6m, but because the size of the sun board can be customized to produce, so the size is different, the style presented is not the same, for the sake of beauty,
In order to save costs, the correct cutting of the sheet becomes a key point.
1. Make sure that the longitudinal direction of the plate in the horizontal and vertical directions is longer than that in the horizontal direction (with the grid side), and the horizontal direction of the plate is not allowed to bend.
2. It is best to draw the finished product size before cutting, so that the cut out of the sun board is more accurate and beautiful.
3, dry air compressor is required to blow out the sun plate groove when cutting. Sawdust can be reduced toward the air. Keep the sun board tidy.
Cutting tips:
When cutting the plate, if a power saw is used, the plate should be clamped to the work table. To prevent the sun plate from scratching the surface, do not remove the protective film in advance; use a manual hacksaw
At the time, people should be found to cooperate with the method to fix the sheet. After the completion, there should be no grooves and accumulated debris on the edge of the sun panel.